ABSTRACT
Objectives@#The objective of this study was to develop and validate a multicenter-based, multi-model, time-series deep learning model for predicting drug-induced liver injury (DILI) in patients taking angiotensin receptor blockers (ARBs). The study leveraged a national-level multicenter approach, utilizing electronic health records (EHRs) from six hospitals in Korea. @*Methods@#A retrospective cohort analysis was conducted using EHRs from six hospitals in Korea, comprising a total of 10,852 patients whose data were converted to the Common Data Model. The study assessed the incidence rate of DILI among patients taking ARBs and compared it to a control group. Temporal patterns of important variables were analyzed using an interpretable timeseries model. @*Results@#The overall incidence rate of DILI among patients taking ARBs was found to be 1.09%. The incidence rates varied for each specific ARB drug and institution, with valsartan having the highest rate (1.24%) and olmesartan having the lowest rate (0.83%). The DILI prediction models showed varying performance, measured by the average area under the receiver operating characteristic curve, with telmisartan (0.93), losartan (0.92), and irbesartan (0.90) exhibiting higher classification performance. The aggregated attention scores from the models highlighted the importance of variables such as hematocrit, albumin, prothrombin time, and lymphocytes in predicting DILI. @*Conclusions@#Implementing a multicenter-based timeseries classification model provided evidence that could be valuable to clinicians regarding temporal patterns associated with DILI in ARB users. This information supports informed decisions regarding appropriate drug use and treatment strategies.
ABSTRACT
The Korean Academy of Asthma, Allergy, and Clinical Immunology task force report aims to provide new protocols for methacholine challenge test (MCT). Although new devices have different delivery system compared to old ones, previous protocols are still used, which cannot guarantee adequate diagnoses of asthma. Another important issue is the recent recommendation in European Respiratory Society (ERS) technical standard guideline to use a delivered methacholine dose that causes a 20% decrease in forced expiratory volume in 1 second (FEV1) (PD 20). Although the previous protocol based on the methacholine concentration causing a 20% decrease in FEV1 (PC 20) has been used globally, several studies have reported that PD 20 is more reliable and applicable for new protocols of MCT. Indeed, a tidal breathing inhalation protocol using a breath-actuated or continuous nebulizer is recommended. Herein, we recommend 3 protocols for the MCT using new devices and provide a brief summary of the change in strategy based on the updated ERS guideline.
ABSTRACT
Background/Aims@#Although a management fee for hospitalist service was established in Korea, the number of hospitalists required for the system to run remains outmatched. @*Methods@#In January 2020 and February 2022, before and after the establishment of the hospitalist fee system respectively, cross-sectional online surveys were conducted among internal medicine board-certified hospitalists. @*Results@#There were 59 and 64 respondents in the 2020 and 2022 surveys, respectively. The percentage of respondents who cited financial benefits as a motive for becoming a hospitalist was higher in the 2022 survey than in the 2020 survey (34.4% vs. 10.2%; p = 0.001). The annual salary of respondents was also higher in the 2022 survey than in the 2020 survey (mean, 182.9 vs. 163.0 million in South Korean Won; p = 0.006). A total of 81.3% of the respondents were willing to continue a hospitalist career in the 2022 survey. In multivariate regression analysis, the possibility of being appointed as a professor was found to be an independent predictive factor of continuing a hospitalist career (odds ratio, 4.00; 95% confidence interval, 1.09–14.75; p = 0.037). @*Conclusions@#Since the establishment of the hospitalist fee system, monetary compensation has improved for hospitalists. The possibility of being appointed as a professor could predict long-term work as hospitalists.
ABSTRACT
Installation of dental implants at optimal angles and positions is critical in longterm stable implant-supported restorations. Surgery and prosthodontic procedures should be performed accurately as the treatment is planned. In this clinical case, Computer aided design and manufacturing technology was used not only to establish a precise surgical plan, but also to fabricate both provisional and definitive fixed prostheses. A surgical guide was designed to install the implants at proper positions for the definitive prostheses. The patient’s esthetic information, which was necessary for the new provisional and definitive fixed prostheses, was obtained from the existing temporary dentures. Finally, the complete mouth fixed implant-supported rehabilitation using monolithic zirconia provided the patient with functionally and esthetically satisfactory prostheses.
ABSTRACT
With the development of digital dentistry, it is being applied in various ways of dental treatment. This case report presents the definitive prosthesis designed in advance with a re-established vertical dimension and the digital technology, which determined the amount of tooth preparation, in order to preserve as much tooth structure as possible in a patient with pathological wear of the posterior teeth and loss of vertical dimension. For accurate tooth preparation, the guides of the occlusal and axial surfaces were digitally and additively manufactured. Then, aesthetics and anterior guidance were established at the provisional stage. The information of the provisional restoration was delivered to the definitive stage by double scanning. The digital technology, including the virtual planning and the guided tooth removal, produced the definitive restorations satisfactory to both the patient and clinician.
ABSTRACT
Objective@#To develop a set of reference standards for tibial motor, common peroneal motor, sural sensory, and superficial peroneal sensory nerve conduction studies (NCSs) with expanded uncertainty in a healthy Korean population. @*Methods@#Standardized procedures were conducted for individual lower extremity NCSs of 199 healthy participants in their 20s (n=100) and 50s (n=99). Mean values and expanded uncertainties for parameters were analyzed with thorough consideration of multiple uncertainty factors under the International Guide to the Expression of Uncertainty in Measurement. In addition, side-to-side differences in onset latency, amplitude, and nerve conduction velocity (NCV) were analyzed. @*Results@#Mean (reference range) for distal onset latency, baseline to negative peak amplitude, NCV of tibial motor nerve in males in their 20s were 4.3 ms (3.1–5.4 ms), 7.1 mV (3.4–10.9 mV), and 50.7 m/s (42.2–59.3 m/s), respectively; sural sensory nerve baseline to negative peak amplitude in males in their 20s was 21.7 μV (8.3–35.2 μV). Including the aforementioned data, we present a vast dataset of normative mean values and expanded uncertainties for NCSs of the leg in a healthy Korean population. Furthermore, upper limits for normal side-to-side differences for onset latency, amplitude, and NCV of each nerve are suggested. @*Conclusion@#To our knowledge, this is the first study to present the reference standards of leg NCSs with consideration for multifactorial uncertainties in an Asian population. We expect these results to help practitioners make reliable and reproducible clinical decisions.
ABSTRACT
Background@#Some reports have suggested that the clinical and economic burdens of asthma are associated with blood eosinophil levels. The association between clinical burden and blood eosinophil counts were evaluated in a Korean adult asthma cohort. @*Methods@#Clinical information including blood eosinophil counts that were not affected by systemic corticosteroids were extracted from the Cohort for Reality and Evolution of Adult Asthma in Korea database. Clinical burden was defined as 1) asthma control status, 2) medication demand and 3) acute exacerbation (AE) events during 1 consecutive year after enrollment. All patients were divided into atopic and non-atopic asthmatics. The associations between asthma outcomes and the blood eosinophil count were evaluated. @*Results@#In total, 302 patients (124 atopic and 178 non-atopic asthmatics) were enrolled. In all asthmatics, the risk of severe AE was higher in patients with blood eosinophil levels < 100 cells/µL than in patients with levels ≥ 100 cells/µL (odds ratio [OR], 5.406; 95% confidence interval [CI], 1.266–23.078; adjusted P = 0.023). Among atopic asthmatics, the risk of moderate AE was higher in patients with blood eosinophil levels ≥ 300 cells/µL than in patients with levels < 300 cells/µL (OR, 3.558; 95% CI, 1.083–11.686; adjusted P = 0.036). Among non-atopic asthmatics, the risk of medication of Global Initiative for Asthma (GINA) steps 4 or 5 was higher in patients with high blood eosinophil levels than in patients with low blood eosinophil levels at cutoffs of 100, 200, 300, 400, and 500 cells/µL. @*Conclusion@#The baseline blood eosinophil count may predict the future clinical burden of asthma.
ABSTRACT
An allergy skin test is used to diagnose certain allergies by identifying sensitized allergens. In other words, it is a test for patients who are already sensitized to certain allergens. Because of the prevailing perception that beta-lactam allergy can be dangerous and potentially lethal, the intradermal test has long been routinely performed before use to screen beta-lactam allergy in Korea. The prevalence of penicillin allergy is estimated to be 1% to 2%. However, only 14% of the subjects with perceived penicillin allergy is considered to have true penicillin allergy. Moreover, it is difficult to justify performing a skin test on subjects who are very unlikely to be sensitized to beta-lactam, such as those who never used beta-lactam or never experienced allergy after previous use of beta-lactam.Therefore, allergists recommend beta-lactam skin testing in those who have allergy after the use of beta-lactam. Nevertheless, many hospitals in Korea are conducting routine skin tests on patients regardless of a history of beta-lactam allergy, which are not clinically validated but consume considerable human and material resources. False-positive results can consequently result in inappropriate labeling of beta-lactam allergy, leading to the unnecessary restriction of medication prescriptions and the increase in medical expenses. Herein, the drug allergy working group affiliated with the Korean Academy of Asthma, Allergy, and Clinical Immunology announces an expert opinion on the preuse beta-lactam skin test for subjects without a history of beta-lactam allergy based on the objective evidence from the literature and clinical relevance.
ABSTRACT
The Korean Society of Radiology and Medical Guidelines Committee amended the existing 2016 guidelines to publish the “Korean Clinical Practice Guidelines for Adverse Reactions to Iodide Contrast for Injection and Gadolinium Contrast for MRI: The Revised Clinical Consensus and Recommendations (2022 Third Edition).” Expert members recommended and approved by the Korean Society of Radiology, the Korean Academy of Asthma, Allergy and Clinical Immunology, and the Korean Nephrology Society participated together. According to the expert consensus or systematic literature review, the description of the autoinjector and connection line for the infection control while using contrast medium, the acute adverse reaction, and renal toxicity to iodized contrast medium were modified and added. We would like to introduce the revised contents.
ABSTRACT
An all-on-4 restoration allows edentulous patients to use a fixed prosthesis with a minimum number of implants. These implant-supported fixed complete dentures have traditionally been fabricated as screw-retained or cementretained prostheses. However, it is difficult to passively fit the long-span full-arch prosthesis using the screw-retained type restoration, and predictable retrievability is not obtained with the cement-retained type. This case report describes a prosthesis fabricated using a combination of the two retention types. The screwmentable method allows the implant-supported fixed complete denture to achieve a passive fit at the connection with retrievability. In addition, a framework with an optimized size was designed by using digital dental technology.
ABSTRACT
PURPOSE@#. This in vitro study aimed to evaluate the surface characteristics of a full veneer crown fabricated chairside (CS) from a (Y, Nb)-TZP zirconia block in response to conventional zirconia grinding and polishing. @*MATERIALS AND METHODS@#. Zirconia crowns (n = 40) were first prepared and divided into two groups of materials: Labside (LS) and CS, after which each specimen went through a five-step grinding and polishing procedure. Following each surface treatment, surface characteristics were analyzed using confocal laser microscopy (CLSM), average surface roughness (Ra) values were processed from the profile data through Gaussian filtering, and X-ray diffraction pattern analysis was performed to evaluate the monoclinic (M) phase content. Then, a representative specimen was selected for field-emission scanning electron microscopy (FE-SEM), followed by a final analysis of the roughness and X-ray diffraction of the specimens using the independent t-test and repeated measures analysis of variance (RM-ANOVA). @*RESULTS@#. In every group, polishing significantly reduced the Ra values (P < .001).There was no significant difference in Ra between the polished state CS and LS.Furthermore, CLSM and FE-SEM investigations revealed that even though grain exposure was visible in CS specimens throughout the as-delivered and ground states, the exposure was reduced after polishing. Moreover, while no phase transformation was visible in the LS, phase transformation was visible in CS after every surface treatment, with the M phase content of the CS group showing a significant reduction after polishing (P < .001). CONCLUSION. Within the limits of this study, clinically acceptable level of surface finishing of (Y, Nb)-TZP can be achieved after conventional zirconia polishing sequence.
ABSTRACT
Background/Aims@#Frailty increases the risks of in-hospital adverse events such as delirium, falls, and functional decline in older adults. We assessed the feasibility and clinical relevance of frailty status in Korean older inpatients using the Clinical Frailty Scale (CFS) and Korean version of the Fatigue, Resistance, Ambulation, Illnesses, & Loss of Weight scale (K-FRAIL) questionnaires. @*Methods@#Frailty status was measured using the Korean-translated version of the CFS and K-FRAIL questionnaire within 3 days from admission in 144 consecutive patients aged 60 years or older. The correlation between CFS and K-FRAIL score was assessed. The criterion validity of CFS was assessed using receiver operating characteristic analysis. As outcomes, delirium, bedsore, length of stay (LOS), in-hospital mortality, and unplanned 30-day readmission were measured by reviewing medical records. @*Results@#The mean age of the study population was 70.1 years (range, 60 to 91), and 75 (52.1%) were men. By linear regression analysis, CFS and K-FRAIL were positively correlated (B = 0.72, p < 0.001). A CFS cutoff of ≥ 5 maximized sensitivity + specificity to classify frailty using K-FRAIL as a reference (C-index = 0.893). Higher frailty burden by both CFS and K-FRAIL was associated with higher LOS and bedsores. Unplanned readmission and in-hospital mortality were associated with higher CFS score but not with K-FRAIL score, after adjusting for age, gender, polypharmacy, and multimorbidity. @*Conclusions@#Frailty status by CFS was associated with LOS, bedsores, unplanned readmission, and in-hospital mortality. CFS can be used to screen high-risk patients who may benefit from geriatric interventions and discharge planning in acutely hospitalized older adults.
ABSTRACT
PURPOSE@#The purpose of this in vitro study was to investigate the wear resistance and surface roughness of three interim resin materials, which were subjected to chewing simulation. @*MATERIALS AND METHODS@#Three interim resin materials were evaluated: (1) three-dimensional (3D) printed (digital light processing type), (2) computer-aided design and computer-aided manufacturing (CAD/CAM) milled, and (3) conventional polymethyl methacrylate interim resin materials. A total of 48 substrate specimens were prepared. The specimens were divided into two subgroups and subjected to 30,000 or 60,000 cycles of chewing simulation (n = 8). The wear volume loss and surface roughness of the materials were compared. Statistical analysis was performed using oneway analysis of variance and Tukey’s post-hoc test (α=.05). @*RESULTS@#The mean ± standard deviation values of wear volume loss (in mm 3 ) against the metal abrader after 60,000 cycles were 0.10 ± 0.01 for the 3D printed resin, 0.21 ± 0.02 for the milled resin, and 0.44 ± 0.01 for the conventional resin. Statistically significant differences among volume losses were found in the order of 3D printed, milled, and conventional interim materials (P <.001). After 60,000 cycles of simulated chewing, the mean surface roughness (Ra; µm) values for 3D printed, milled, and conventional materials were 0.59 ± 0.06, 1.27 ± 0.49, and 1.64 ± 0.44, respectively. A significant difference was found in the Ra value between 3D printed and conventional materials (P =.01). @*CONCLUSION@#The interim restorative materials for additive and subtractive manufacturing digital technologies exhibited less wear volume loss than the conventional interim resin.The 3D printed interim restorative material showed a smoother surface than the conventional interim material after simulated chewing.
ABSTRACT
Precise allergy diagnosis and effective allergen specific immunotherapy are largely dependent on the quality of allergen extract. A new extract of Dermatophagoides farinae was commercially developed by Prolagen. The allergenic properties of the new extract were compared with those of other commercial products. The allergenic properties of the new extract were compared according to protein concentration, protein profiles, major allergen (Der f 1) contents, and allergenic potency to those for three commercially available extracts imported in Korea (Jubilant HollisterStier Allergy, Lofarma S.p.A., and Stallergenes Greer). Protein concentrations varied up to 2.62-fold (0.404 to 1.057 mg/mL), and Der f 1 contents varied up to 11.3-fold (3.597 to 40.688 μg/mL). Protein profiles of the extracts showed no major discrepancies, although there were some differences in SDS-PAGE band intensities, reflecting protein concentrations. Allergen potency ranged from 37038 to 60491 PAU/mL. The Prolagen product was highest in terms of protein concentration and allergen potency. The Lofarma product displayed Der f 1 content similar to that in Prolagen (19.4 μg/mg vs. 19.3 μg/mg). Endotoxin levels varied 8.9-fold (1020 to 8985 EU/mL). The newly developed house dust mite extract showed equal or better allergenic properties than available commercial extracts. This new product may be useful for better diagnostics and allergen-specific immunotherapeutics.
ABSTRACT
Background@#Particulate matter 10 (PM10; airborne particles <10 μm) inhalation has been demonstrated to induce airway and lung diseases. In this study, we investigate the effects of PM10 inhalation on RNA expression in lung tissues using a murine model. @*Methods@#Female BALB/c mice were affected with PM10, ovalbumin (OVA), or both OVA and PM10. PM10 was administered intranasally while OVA was both intraperitoneally injected and intranasally administered. Treatments occurred 4 times over a 2-week period. Two days after the final challenges, mice were sacrificed. Full RNA sequencing using lung homogenates was conducted. @*Results@#While PM10 did not induce cell proliferation in bronchoalveolar fluid or lead to airway hyper-responsiveness, it did cause airway inflammation and lung fibrosis. Levels of interleukin 1β, tumor necrosis factor-α, and transforming growth factor-β in lung homogenates were significantly elevated in the PM10-treated group, compared to the control group. The PM10 group also showed increased RNA expression of Rn45a, Snord22, Atp6v0c-ps2, Snora28, Snord15b, Snora70, and Mmp12. Generally, genes associated with RNA splicing, DNA repair, the inflammatory response, the immune response, cell death, and apoptotic processes were highly expressed in the PM10-treated group. The OVA/PM10 treatment did not produce greater effects than OVA alone. However, the OVA/PM10-treated group did show increased RNA expression of Clca1, Snord22, Retnla, Prg2, Tff2, Atp6v0c-ps2, and Fcgbp when compared to the control groups. These genes are associated with RNA splicing, DNA repair, the inflammatory response, and the immune response. @*Conclusion@#Inhalation of PM10 extensively altered RNA expression while also inducing cellular inflammation, fibrosis, and increased inflammatory cytokines in this murine mouse model.
ABSTRACT
Objective@#We investigated the usefulness of maximal expiratory pressure (MEP) in evaluating dysphagia subsequent to ischemic stroke. @*Methods@#This study included patients with ischemic stroke who underwent MEP testing and videofluoroscopic swallowing study (VFSS), from October 2016 to February 2020. The VFSS findings were interpreted using the penetrationaspiration scale (PAS) and functional dysphagia scale (FDS). Patients were stratified into the non-aspiration (n=59) and aspiration (n=47) groups. Partial correlation analysis among MEP, PAS, and FDS was performed after adjusting for age. Binary logistic regression using PAS was conducted to investigate the risk factors predisposing patients to inclusion in the aspiration group. Multiple linear regression using FDS was conducted to investigate the risk factors according to dysphagia severity. Receiver operating characteristic (ROC) curve analysis was applied to investigate factors which could be useful for detecting aspiration. @*Results@#Student’s t-test revealed a significant difference in MEP between the non-aspiration and aspiration groups.MEP showed a positive correlation with PAS and FDS. MEP was also determined to be a risk factor for inclusion into the aspiration group, and a risk factor according to the severity of dysphagia. In the ROC curve analysis, MEP showed good diagnostic properties to help classify patients with aspiration. @*Conclusion@#Our results indicate that swallowing assessment can predict and help prevent aspiration pneumonia in patients with ischemic stroke. In the present study, MEP showed significant association with aspiration and the severity of dysphagia. Thus, determining the MEP during swallowing assessment in patients with ischemic stroke is potentially a useful parameter to predict dysphagia.
ABSTRACT
Objective@#To investigate the clinical factors associated with successful gastrostomy tube weaning in patients with prolonged dysphagia after stroke. @*Methods@#This study involved a retrospective medical chart review of patients diagnosed with prolonged dysphagia after stroke who underwent gastrostomy tube insertion between May 2013 and January 2020. Forty-seven patients were enrolled and consequently divided into gastrostomy tube sustaining and weaning groups. The numbers of patients in the sustaining and weaning groups were 31 and 16, respectively. The patients’ demographic data, Korean version of Mini-Mental State Examination (K-MMSE) score, Korean version of the Modified Barthel Index (K-MBI), Functional Dysphagia Scale (FDS) score, and Penetration-Aspiration Scale (PAS) score were compared between the two groups. A videofluoroscopic swallowing study was performed before making the decision of gastrostomy tube weaning. The clinical factors associated with gastrostomy tube weaning were then investigated. @*Results@#There were significant differences in age; history of aspiration pneumonia; K-MMSE, FDS, and PAS scores; and K-MBI between the groups. In the multiple logistic regression analysis, the FDS (odds ratio [OR]=0.791; 95% confidence interval [CI], 0.634–0.987) and PAS scores (OR=0.205; 95% CI, 0.059–0.718) were associated with successful gastrostomy tube weaning. In the receiver operating characteristic curve analysis, the FDS and PAS were useful screening tools for successful weaning, with areas under the curve of 0.911 and 0.918, respectively. @*Conclusion@#In patients with prolonged dysphagia, the FDS and PAS scores are the only factors associated with successful gastrostomy tube weaning. An evaluation of the swallowing function is necessary before deciding to initiate gastrostomy tube weaning.
ABSTRACT
Background/Aims@#Frailty increases the risks of in-hospital adverse events such as delirium, falls, and functional decline in older adults. We assessed the feasibility and clinical relevance of frailty status in Korean older inpatients using the Clinical Frailty Scale (CFS) and Korean version of the Fatigue, Resistance, Ambulation, Illnesses, & Loss of Weight scale (K-FRAIL) questionnaires. @*Methods@#Frailty status was measured using the Korean-translated version of the CFS and K-FRAIL questionnaire within 3 days from admission in 144 consecutive patients aged 60 years or older. The correlation between CFS and K-FRAIL score was assessed. The criterion validity of CFS was assessed using receiver operating characteristic analysis. As outcomes, delirium, bedsore, length of stay (LOS), in-hospital mortality, and unplanned 30-day readmission were measured by reviewing medical records. @*Results@#The mean age of the study population was 70.1 years (range, 60 to 91), and 75 (52.1%) were men. By linear regression analysis, CFS and K-FRAIL were positively correlated (B = 0.72, p < 0.001). A CFS cutoff of ≥ 5 maximized sensitivity + specificity to classify frailty using K-FRAIL as a reference (C-index = 0.893). Higher frailty burden by both CFS and K-FRAIL was associated with higher LOS and bedsores. Unplanned readmission and in-hospital mortality were associated with higher CFS score but not with K-FRAIL score, after adjusting for age, gender, polypharmacy, and multimorbidity. @*Conclusions@#Frailty status by CFS was associated with LOS, bedsores, unplanned readmission, and in-hospital mortality. CFS can be used to screen high-risk patients who may benefit from geriatric interventions and discharge planning in acutely hospitalized older adults.
ABSTRACT
PURPOSE@#The purpose of this in vitro study was to investigate the wear resistance and surface roughness of three interim resin materials, which were subjected to chewing simulation. @*MATERIALS AND METHODS@#Three interim resin materials were evaluated: (1) three-dimensional (3D) printed (digital light processing type), (2) computer-aided design and computer-aided manufacturing (CAD/CAM) milled, and (3) conventional polymethyl methacrylate interim resin materials. A total of 48 substrate specimens were prepared. The specimens were divided into two subgroups and subjected to 30,000 or 60,000 cycles of chewing simulation (n = 8). The wear volume loss and surface roughness of the materials were compared. Statistical analysis was performed using oneway analysis of variance and Tukey’s post-hoc test (α=.05). @*RESULTS@#The mean ± standard deviation values of wear volume loss (in mm 3 ) against the metal abrader after 60,000 cycles were 0.10 ± 0.01 for the 3D printed resin, 0.21 ± 0.02 for the milled resin, and 0.44 ± 0.01 for the conventional resin. Statistically significant differences among volume losses were found in the order of 3D printed, milled, and conventional interim materials (P <.001). After 60,000 cycles of simulated chewing, the mean surface roughness (Ra; µm) values for 3D printed, milled, and conventional materials were 0.59 ± 0.06, 1.27 ± 0.49, and 1.64 ± 0.44, respectively. A significant difference was found in the Ra value between 3D printed and conventional materials (P =.01). @*CONCLUSION@#The interim restorative materials for additive and subtractive manufacturing digital technologies exhibited less wear volume loss than the conventional interim resin.The 3D printed interim restorative material showed a smoother surface than the conventional interim material after simulated chewing.
ABSTRACT
PURPOSE: A stability-measuring device that utilizes damping capacity analysis (DCA) has recently been introduced in the field of dental implantology. This study aimed to evaluate the sensitivity and reliability of this device by measuring the implant stability of ex vivo samples in comparison with a resonance frequency analysis (RFA) device.METHODS: Six implant beds were prepared in porcine ribs using 3 different drilling protocols to simulate various implant stability conditions. Thirty-six pork ribs and 216 bone-level implants measuring 10 mm in height were used. The implant beds were prepared using 1 of the following 3 drilling protocols: 10-mm drilling depth with a 3.5-mm-diameter twist drill, 5-mm drilling depth with a 4.0-mm-diameter twist drill, and 10-mm drilling depth with a 4.0-mm-diameter twist drill. The first 108 implants were external-connection implants 4.0 mm in diameter, while the other 108 implants were internal-connection implants 4.3 mm in diameter. The peak insertion torque (PIT) during implant placement, the stability values obtained with DCA and RFA devices after implant placement, and the peak removal torque (PRT) during implant removal were measured.RESULTS: The intraclass correlation coefficients (ICCs) of the implant stability quotient (ISQ) results obtained using the RFA device at the medial, distal, ventral, and dorsal points were 0.997, 0.994, 0.994, and 0.998, respectively. The ICCs of the implant stability test (IST) results obtained using the DCA device at the corresponding locations were 0.972, 0.975, 0.974, and 0.976, respectively. Logarithmic relationships between PIT and IST, PIT and ISQ, PRT and IST, and PRT and ISQ were observed. The mean absolute difference between the ISQ and IST values on a Bland-Altman plot was −6.76 (−25.05 to 11.53, P<0.05).CONCLUSIONS: Within the limits of ex vivo studies, measurements made using the RFA and DCA devices were found to be correlated under a variety of stability conditions.